You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 51 Next »

Attention:

Trimble 1 and Trimble 2 GPS Receivers are operated by ship's command only.

The sensor is essential device providing position data for a large number of scientific devices. Most sensors do not directly receive positions from GPS sensor but from motion sensor Hydrins.

The system TRIMBLE 1 / HYDRINS 1 and TRIMBLE 2 / HYDRINS 2 are alternatively sending positions to the customers. DShip is logging positions from both GPS receivers in parallel.

Summary

The Trimble R750 is a combined radio and GPS receiver. It uses all currently available satellite signals including L1, L2 and the GPS modernized L2C code.

Trimble 1

Manufacturer Trimble Navigation Limited
Model Trimble R750
Serial No. 6236R47098
Type satellite positioning system
SENSOR-Link ↪

Trimble 2

Manufacturer Trimble Navigation Limited
Model Trimble R750
Serial No. 6236R47107
Type satellite positioning system
SENSOR-Link ↪
No images available.

Contacts

No contacts available.

Components

There are two independent systems installed, called TRIMBLE 1 and TRIMBLE 2. Both consist of an antenna GA-830 model and a receiver of type R750. Antennas are installed on antenna deck above bridge. The two receivers are installed in scientific panel on bridge. TRIMBLE 1 is sending NMEA0183 telegrams to motion sensor HYDRINS 1 and DShip. TRIMBLE 2 is sending telegrams to motion sensor HYDRINS 2 and DShip.

Position

Trimble 1 antenna position

Infoxyz-position of antenna from Alignment Survey Report RV Polarstern (June 2016), located on upper observation deck
X78.753 m
(X-0 is at the center of der rudder (ref. design drawing of the vessel), positive X-axis is forward and along vessel centerline)
Y-8.635 m
(Y-0 at centerline, positive Y-axis is portside)
Z33.37 m
(Z-0 is set to the lowest point of the keel, positive Z-axis is upwards)

Trimble 2 antenna position

Infoxyz-position of antenna from Alignment Survey Report RV Polarstern (June 2016), located on upper observation deck
X72.503 m
(X-0 is at the center of der rudder (ref. design drawing of the vessel), positive X-axis is forward and along vessel centerline)
Y9.234 m
(Y-0 at centerline, positive Y-axis is portside)
Z33.383 m
(Z-0 is set to the lowest point of the keel, positive Z-axis is upwards)

Data logging, storage and archiving

Logged parameters

Parameter Sensor Output Type Unit
Latitude latitude deg
LONGITUDE longitude deg
number of satellites quality flag
Time Stamp time

Central geographical ship's position and time standard

GPS receiver TRIMBLE 1 is running as time server for several clients on board.
GPS positions of TRIMBLE 1 and TRIMBLE 2 are centered to the corresponding antenna.

Rawdata storage on board

Data storage in DShip system.

Dship

Unevaluated and uncorrected measurement data.

Device name

trimble 1 GPS
trimble 2 GPS

Parameters

course made good [°]; Date; day; EW; GPS quality indicator; month; NS; number of satellites in fix; position latitude [°]; position longitude [°]; raw time; speed made good [kn]; Time; UTC raw [s]; year

Data archiving on land

After the cruise the DShip data set can be extracted from https://dship.awi.de/.

File format(s)

*.txt

Calibration certificates

NO

Documentation



  • No labels

null