Attention:
The 150_kHz transducer is one of the transducers of the ADCP.
Summary
The Ocean Surveyor/Ocean Observer is designed for current profile measurement in the upper ocean water. The system consists of a transducer and electronics chassis. Data are transmitted in either an ASCII or binary format through the I/O cable.
| Manufacturer | Teledyne RDI |
|---|---|
| Model | Ocean Surveyor |
| Serial No. | n/a |
| Type | current profiler |
Transducer Frequency
150_kHz
Position
| Origin Description: | xyz-position of the 150kHz transducer from Alignment Survey Report RV Heincke (January 2016) |
| X: | 45.022 m (Positive X axis is forward and along the centerline of the vessel with X0 at the Stern point of the vessel. ) |
| Y: | -0.233 m (Positive Y axis is portside of centerline with Y0 at centerline at the very stern point of the vessel. ) |
| Z: | -0.088 m (Positive Z axis is upwards of basis. Z0 is set to the hydrophone on midship.) |
Parameters
| Parameter | Sensor Output Type | Unit |
|---|---|---|
| current velocities in depth range up to max. 400m | current speed | m/s |