You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 53 Next »

Attention:

Please note that operations of the Fishing Echo Sounder Simrad EK 60 / EK 80 requires experienced scientific staff on board and can be only operated on request. The system is not operated by the ship's crew. Request operations with the Fishing Echo Sounder Simrad EK 60 / EK 80 to AWI-Logistics in sufficient time prior to the cruise and clarify the data transfer after the cruise.

Data quality of Fishing Echo Sounder Simrad EK 60 / EK 80 is decreased by operating other Echo Sounders. Switch off these Echo Sounders for high data quality.

Summary

The sounder operates several frequencies simultaneously thus allowing to detect fish or even plancton in different depths.


Manufacturer Kongsberg
Model Simrad EK 60 / EK 80
Serial No. n/a
Type echo sounder
SENSOR-Link

Transducer Frequency

Contacts

Name Institution Role
Sören Krägefsky Alfred Wegener Institute, Helmholtz Centre for Polar and Marine Research Data Scientist

Components

The four split beam transducer ES-38B, ES-70C, ES-120C and ES-200C are installed in the keel of RV Heincke. The transceiver and receiver are situated in the Lotgeraeteraum. Three PCs are available for handling of the EK60/80 on the bridge, in the Messraum and in the dry laboratory. Additionally a display is located in the wet laboratory.

The PCs are equipped with the aquisiton and processing software ER60. For further processing the software "echoview" may be used. A dongle is required for usage of the software. The dongle is NOT permanently stored on the ship. Please contact the responsible person for usage of the dongle in advance of the cruise.

Name Model Serial Number SENSOR-
Link
EK60 120 kHz transducer WBT: 580699
EK60 200 kHz transducer WBT: 582193
EK60 38 kHZ transducer WBT: 582157
EK60 70 kHz transducer WBT: 582166

Position

InfoThe transducer of the Fishing Echo Sounder system are situated in the keel of RV Heincke. Transceiver and receiver are located in the so called Lotgeraeteraum and the computers are stored in the Mess- and Registrierraum.

Data logging, storage and archiving

Logged parameters

Parameter Sensor Output Type Unit
depth at different frequencies depth m

Central geographical ship's position and time standard

Rawdata storage on board

DShip

Data archiving on land

Documentation

  • No labels