Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Automatically updated by Sensor2Confluence-Transporter (aircrafts@ingest)


Note
titleAttention:

Magnetic compensation flight procedures are required after each new installation of the magnetic sensors.

Summary

Sensorweb integration
urnaircraft:bt-67:magnetics
contenttypeSummary

Magnetic measurements provide the direction of the geomagnetic field. Therefore, 2 Cesium Magnetometers are mounted in a Nose and a Tail Boom to the aircraft. In addition, a Fluxgate Magnetometer for attitude compensation is installed. The sensor system is controlled by an external unit (AADC II) mounted in a rack. Magnetic base stations with Overhauser magnetometers are used for ground reference of the airborne measurements.

Sensor-Info: aircraft:bt-67:magnetics, 6815



Sensorweb integration
urnaircraft:bt-67:magnetics
contenttypeMetadata
ManufacturerRMS Instruments, Scintrex Ltd., RMS Instruments
Modelsee subdevices
Serial No.n/a
Typemagnetometer


Sensorweb integration
urnaircraft:bt-67:magnetics
contenttypeImages

Contacts

Sensorweb integration
urnaircraft:bt-67:magnetics
contenttypeContacts
Name Institution Role
Graeme EaglesAlfred-Wegener Institute of Polar and Marine ResearchDevice Contact


Available devices and Specifications

Sensorweb integration
urnaircraft:bt-67:magnetics
contenttypeSubdevices
Name Model Serial Number
Automatic Aeromagnetic Digital Compensator AADCII9903860
Cesium Magnetometer CS-3 9511042
Cesium Magnetometer CS-3 9503008
Cesium Magnetometer CS-3 9810135
Cesium Magnetometer CS-3 9808131
Cesium Magnetometer CS-3 1203404
Fluxgate Magnetometer TFM100G1E110
Fluxgate Magnetometer TFM100G1E999
Overhauser Magnetometer GSM-19 GSM-1952498
Overhauser Magnetometer GSM-19 GSM-1962673


Specifications of RMS Compensator AADC II (without mounting)

Metadata list
|| Dimension Compensator (L x W x H)| 483 x 440 x 178 mm ||
|| Weight | 12.5 kg||
|| Power Supply| 28 VDC ||
|| Data interface | serial interface (RS-232)||


Specifications of CS-3 Scintrex Cesium Magnetometers (without mounting)

The CS-3 magnetometers are installed at the tips of the noseboom and the tailboom. Length of the noseboom from the tip of the aircraft is about 3.3 m.

Metadata list
|| Dimension Sensor Head (Diameter x L)| 63 x 160 mm ||
|| Weight | 1.15 kg||
|| Dimension Sensor Electronics (Diameter x L | 63 x 350 mm ||
|| Weight | 1.5 kg || 
|| Power Supply| 24 - 35 VDC ||


Specifications of Billingsley Fluxgate Magnetometer (without mounting)

Metadata list
|| Dimension Fluxgate (L x W x H) | 83 x 35 x 32 mm ||
|| Weight | 0.1 kg ||
|| Power Supply | 15 - 34 VDC ||
|| Data interface | serial interface (RS-232)||


Specifications of GEM Overhauser Magnetometer

Metadata list
|| Dimension Sensor (Diameter x L) | 75 x 175 mm ||
|| Weight Sensor | 1.0 kg ||
|| Dimension Console (L x W x H) | 223 x 240 x 69 mm ||
|| Weight Sensor | 2.1 kg ||
|| Data interface | serial interface (RS-232)||


Position

Sensorweb integration
urnaircraft:bt-67:magnetics
contenttypeLocalFrame
Origin Description:CS-3 Cesium Magnetometers are mounted in a tail and a nose boom respectively. Additionally, a fluxgate magnetometer is mounted close to the aileron. Electronics are stored in a rack.


Data logging, storage and archiving

Logged parameter

Sensorweb integration
urnaircraft:bt-67:magnetics
contenttypeParameters
Parameter Sensor Output Type Unit
magnetic field compensatedmagnetic fieldnT
magnetic field rawmagnetic fieldnT
magnetic field uncompensatedmagnetic fieldnT
magnetic field totalmagnetic fieldnT
magnetic field x-component magnetic fieldnT
magnetic field y-componentmagnetic fieldnT
magnetic field z-componentmagnetic fieldnT


Rawdata storage on board

Metadata (Metadata Plugin)
0Rawdata
During flight magnetometer data are stored within the aircraft onboard DMS system. Magnetic base stations record data independantly and continously.

Data archiving on land

Metadata (Metadata Plugin)
0DataOnLand
After the flight CS-3 and Fluxgate magnetometer data are accessible via the land system of the aircraft data managment system (DMS). Base station data of the GEM Overhauser magnetometers are downloaded frequently and are made accessible via the external devices file system of the aircraft data managment system (DMS).

DMS

Metadata list
|| Module name| B707 Magnetic||
|| Device name | Magnetic||
|| Parameters | 4DIF(F) front \[nT\]; 4DIF(R) rear \[nT\]; Compensated grad 1 \[nT\]; Compensated mag front \[nT\]; Compensated mag rear \[nT\]; Error code; ErrorText; Magnetic ASCII; Mode code; Scan Number \[0.1 s\]; Status; Total field (Fluxgate) \[nT\]; Uncompensated grad 1 \[nT\]; Uncompensated mag front \[nT\]; Uncompensated mag rear \[nT\]; X-component (Fluxgate) \[nT\]; Y-component (Fluxgate) \[nT\]; Z-component (Fluxgate) \[nT\] ||


Documentation

Sensorweb integration
urnaircraft:bt-67:magnetics
contenttypeResources