Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Automatically updated by Registry2Confluence-Transporter (heincke@ingestsrv1, ask o2a-support@awi.de for questions)


Note
titleAttention:

The Trimble GPS receiver provides position data for scientific devices.

Summary

Sensorweb integration
urnvessel:heincke:trimble_5228k50585
contenttypeSummary

The SPS461 GPS Heading and Positioning Receivers are modular, dual-antenna systems for marine construction and hydrographic survey. It may improve accuracy by using DGPS via SBAS, OmniSTAR VBS, MSK Beacon or external RTCM DGPS corrections. The receiver is equipped with a single GA530 L1/L2/OmniSTAR/Beacon/SBAS antenna. Therefore heading, roll and pitch cannot be calculated.



Sensorweb integration
urnvessel:heincke:trimble_5228k50585
contenttypeMetadata
ManufacturerTrimble
ModelTrimble Marine SPS461
Serial No.5228K50585
Typesatellite positioning system
REGISTRY-Link↪ REGISTRY (8571)


Sensorweb integration
urnvessel:heincke:trimble_5228k50585
contenttypeImages

Contacts

Sensorweb integration
urnvessel:heincke:trimble_5228k50585
contenttypeContacts
Name Institution Role
Ralf KrockerAlfred Wegener Institute, Helmholtz Centre for Polar and Marine ResearchEngineer In Charge

Components

The GPS receiver is installed on the bridge deck. The antenna is installed on the observation deck.

In the registration lab an NMEA stream of GPS records can be received. 4 sockets of RS232 type (DSub9) with following setting are available: 4800 Baud, No Parity, 8 Data Bits, 1 Stop Bit.
NMEA records of type $GPGGA, $GPVTG, $GPZDA, $GPRMC, $GPGLL are provided with 1 Hz.


Sensorweb integration
urnvessel:heincke:trimble_5228k50585
contenttypeSubdevices

No subdevices available.

Position

Sensorweb integration
urnvessel:heincke:trimble_5228k50585
contenttypeLocalFrame
Infoxyz-position of antenna from Alignment Survey Report RV Heincke (January 2016). Antenna located on observation deck, device located on bridge deck.
X39.6 m
(Positive X axis is forward and along the centerline of the vessel with X0 at the Stern point of the vessel. )
Y-2.129 m
(Positive Y axis is portside of centerline with Y0 at centerline at the Very stern point of the vessel. )
Z16.433 m
(Positive Z axis is upwards of basis. Z0 is set to the hydrophone on midship.)

Data logging, storage and archiving

Logged parameters

Sensorweb integration
urnvessel:heincke:trimble_5228k50585
contenttypeParameters
Parameter O2ARegistry Output Type Unit
course over groundattitudedeg
daydate and timed
latitudelatitudedeg
monthdate and timemo
longitudelongitudedeg
yeardate and timea
differential reference station IDindexnumber
GPS quality indicatorquality flagnumber
number of satellitesindexnumber
speed over groundspeedknot
altitudedistancem


Additionally a computer is installed receiving T02 data from this sensor. These data are used to calculate GPS tide. Three different services are available: 1=Uncorrected, 2=Ultra-rapid and 3=Rapid/Final. GPS tide is provided as two column file (date/time, height) to be used by multibeam echo sounder. See more details in Heincke_GPS_Tide_v20191016.pdf.


Central geographical ship's position and time standard

Metadata (Metadata Plugin)
0timestandard

Rawdata storage on board

Metadata (Metadata Plugin)
0Rawdata

Dship

Metadata (Metadata Plugin)
0DShip


Metadata list

Data archiving on land

Metadata (Metadata Plugin)
0DataOnLand

Documentation

Sensorweb integration
urnvessel:heincke:trimble_5228k50585
contenttypeResources