Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Automatically updated by Sensor2Confluence-Transporter (polarstern@ingest)

...

Sensorweb integration
urnvessel:polarstern:adcp
contenttypeSummary

The Acoustic Doppler Current Profiler (ADCP) measures flow rates in the water body below the moving vessel up to 400m range. Operation frequency is 150 kHz

vessel:polarstern:adcp (625)

Sensorweb integration
urnvessel:polarstern:adcp
contenttypeMetadata
ManufacturerTeledyne RDI
ModelOcean Surveyor
Serial No.n/a
Typecurrent profiler

...

Sensorweb integration
urnvessel:polarstern:adcp
contenttypeContacts
Editor
Name Institution Role
Hannelore WitteAlfred-Wegener-InstituteEngineer In Charge
Hannelore WitteAlfred-Wegener-InstituteData Scientist
Sandra TippenhauerAlfred-Wegener-Institute
Alfred Wegener Institute for Polar and Marine ResearchAlfred Wegener Institute, Helmholz Centre for Polar and Marine ResearchOwnerpolarstern
dshipHannelore WitteAlfred-Wegener-Institutedship connectorEngineer In Charge, Data Scientist

Components

Metadata (Metadata Plugin)
0Components
The system consits of the transducer, the electronic chassis, the computer in the echosounder room (G-707) and the subsidiary display at the winch control station (User).
The data acquisition and processing software VmDas and the synchronizing software Easy2Sync are installed on the computer.
The 150kHz transducer is mounted behind an ice protection window and reaches water depth up to 350m with resolution of 4m ("Cell Size" at 1 to 5 kn ship's speed) and accuracy of about 0.30 m/s for a Single-Ping measurement.
The angle between the ship centerline and transducer centerline is 45° direction starboard.

...

Sensorweb integration
urnvessel:polarstern:adcp
contenttypeLocalFrame
Origin Description:Infoxyz-position of transducer from Alignment Survey Report RV Polarstern (June 2016), transducer located in box keel room, electronics in E525A, computer in winch control station
X:65.769 m
(X-0 is at the center of der rudder (ref. design drawing of the vessel), positive X-axis is forward and along vessel centerline)
Y:0.005 m
(Y-0 at centerline, positive Y-axis is portside)
Z:0.03 m
(Z-0 is set to the lowest point of the keel, positive Z-axis is upwards)

...