Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Automatically updated by Sensor2Confluence-Transporter (heincke@ingest)


Note
titleAttention:

Please note that operations of the CTD (Conductivity-Temperature-Depth) watersampler requires experienced scientific staff on board. The system is not operated by the ship's crew. Announce operations with the CTD watersampler to AWI-Logistics prior to the cruise and clarify the data transfer after the cruise.

Summary

Sensorweb integration
urnvessel:heincke:ctd_sbe9plus_1015
contenttypeSummary

The CTD probe measures conductivity and temperature along a vertical transect through the water body. The measured parameter are used to calculate the salinity of the water. Additionally, up to 24 water samples can be taken in different water depths during the CTD measurements. A fluorometer, an oxygen sensor and a transmissiometer are attached to the CTD as well. The system is operational up to 2000m water depth.



Sensorweb integration
urnvessel:heincke:ctd_sbe9plus_1015
contenttypeMetadata
ManufacturerSeabird
ModelSBE911plus mit SBE32
Serial No.SBE11P S/N: 11P52063-0792
TypeCTD



Sensorweb integration
urnvessel:heincke:ctd_sbe9plus_1015
contenttypeImages

Contacts

Sensorweb integration
urnvessel:heincke:ctd_sbe9plus_1015
contenttypeContacts
Name Institution Role
Gerd RohardtAlfred-Wegener-InstituteData Scientist
Andreas WisotzkyAlfred-Wegener-Institute for Polar and Marine ResearchData Scientist

Components

The CTD system consists of the underwater unit SBE 9plus, the deck unit SBE 11plus V2 and the carousel water sampler SBE32 which is equipped with free flow water samplers manufactured by Hydro-Bios. The CTD is outfitted with a double set of temperature (SBE 3plus) and conductivity (SBE 4C) sensors that are calibrated regularly. Additionally, an altimeter, a transmissometer, an oxygen sensor and a fluorometer may be attached to the CTD unit and operated to water depths of 6000m.

On the CTD data aquisition PC in the Messraum following software is installed: aquisition software Seasave (Version V7_19), SBE Data processing software, ManageCTD software packet for cleansing and conversion of the data and Ocean Data View (ODV) for visualization.

Under the table in the Messraum a frame with four backup bottles is installed.


Sensorweb integration
urnvessel:heincke:ctd_sbe9plus_1015
contenttypeSubdevices
Name Model Type
C-Star transmissometer C-Startransmissometer
ECO FL fluorometer ECO FLfluorescence Sensor
PSA-916 Sonar Altimeter PSA-916altimeter
SBE 5P pump SBE 5Ppump
SBE32 water sampler SBE32remote water sampler
SBE3plus temperature sensor SBE3plustemperature sensor
SBE4 conductivity sensor SBE4conductivity meter
SBE43 oxygene sensor SBE43oxygen sensor

Position


Sensorweb integration
urnvessel:heincke:ctd_sbe9plus_1015
contenttypeLocalFrame
Origin Description:The CTD unit is usually stored on the main deck. Electronics and the computer for operation are installed in the Mess- und Registrierraum.

Data logging, storage and archiving

Logged parameters

Sensorweb integration
urnvessel:heincke:ctd_sbe9plus_1015
contenttypeParameters
Parameter Sensor Output Type Unit
conductivityconductivityS/m
water temperaturewater temperature°C
oxygen contentoxygenml/l
pressurepressuredbar
fluorescencefluorescenceV
distance to sea floordistancem
transmissiontransmission%

Central geographical ship's position and time standard


Metadata (Metadata Plugin)
0timestandard


Rawdata storage on board


Metadata (Metadata Plugin)
0Rawdata


Metadata list


DShip


Metadata (Metadata Plugin)
0DShip


Data archiving on land


Metadata (Metadata Plugin)
0DataOnLand


Documentation

Sensorweb integration
urnvessel:heincke:ctd_sbe9plus_1015
contenttypeResources